64 Printer Connection and Software Installation
5 Ensure that Wizard is selected, and then click Next.
6 Follow the on-screen instructions to connect the USB cable and perform other setup until the
Printer Setup Utility screen appears.
7 Select either of the following:
• Click the Select from the found Access Points radio button and select the SSID.
• Click the Input the SSID directly radio button and enter the SSID in the SSID box.
8 Click Next.
9 Select Type of wireless network.
10 Configure the security setting, and then click Next.
The IP Address Settings screen appears.
To Next Page
Loading...
