Level 1 Level 2 Level 3 Description
IPsec
- - IPsec is an optional security feature of the IP protocol that
provides authentication and encryption services. We
recommend contacting your network administrator before
changing this setting.
Network Reset
- - Restore all network settings of your machine to the factory
settings.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
[Reset Menu]
Level 1
Description
Network
Restore all network settings of your machine to the factory settings.
Factory Reset
Reset the machine and restore the printer settings (including command settings) to the factory
settings.
Related Information
• Settings and Features Tables
280
To Next Page
Loading...
Need help?
General
