283
[Network] (DocuPrint P375 d)
*1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address
and Subnet Mask from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be
allocated, such as 169. 254. [001-254]. [000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must
manually enter an IP address from the machine's control panel.
[Network] (DocuPrint P385 dw/DocuPrint P375 dw)
Level 1 Level 2 Description
TCP/IP Boot Method Choose the IP method that best suits your needs.
IP Address Enter the IP address.
Subnet Mask Enter the Subnet mask.
Gateway Enter the Gateway address.
IP Boot Tries Specify the number of attempts the machine will try to obtain an IP address
when the Boot Method is set to any setting except Static.
APIPA
Allocate the IP address from the link-local address range automatically
*1
.
IPv6 Enable or disable the IPv6 protocol.
Ethernet - Choose the Ethernet link mode.
Wired Status - Display the Ethernet link status.
MAC Address - Display the MAC address of the machine.
IPsec - IPsec is an optional security feature of the IP protocol that provides
authentication and encryption services. We recommend contacting your
network administrator before changing this setting.
Network Reset - Restore all network settings of your machine to the factory settings.
Level 1 Level 2 Level 3 Description
Wired LAN TCP/IP Boot Method Choose the IP method that best suits your needs.
IP Address Enter the IP address.
Subnet Mask Enter the Subnet mask.
Gateway Enter the Gateway address.
IP Boot Tries Specify the number of attempts the machine will try to
obtain an IP address when the Boot Method is set to
any setting except Static.
APIPA Allocate the IP address from the link-local address
range automatically
*1
.
IPv6 Enable or disable the IPv6 protocol.
Ethernet - Choose the Ethernet link mode.
Wired Status - Display the Ethernet link status.
MAC Address - Display the MAC address of the machine.
Set to Default - Restore wired network settings of your machine to the
factory settings.
Wired Enable - Turn the wired interface on or off.