FGS-305103-Ni
BL00275-200
(
1
)
A. Loading the batteries
1. Check that the camera is switched
off (viewfinder lamp switches off)
before opening the battery cover.
2. Load the batteries correctly as
shown.
2. Slide the Power switch to turn the
camera on.
1. Set the Mode dial to q.
2. Press the shutter button down half way to adjust
the focus.
3. Press the shutter button down fully to take a
picture. The camera makes a “Beep” sound and
takes the picture.
D. Viewing a picture
1. Set the Mode dial to w.
2. Press the “d” or “c” to move
through your images.
3. You can select your preferred date
format.
Press “d” or “c” to select the date
format.
Press “a” or “b” to set the format.
*
Refer to owner’s manual for
date/time setup.
01
02
1
2 3
Camera Controls
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Still images that can be viewed on the FinePix A310
You can use this camera to view still images recorded on the FinePix A310 or
still images (excluding some uncompressed images) recorded on a FUJIFILM
digital camera that supports xD-Picture Cards.
3
1. Align the gold mark on the xD-
Picture Card slot with the gold
contact area on the xD-Picture
Card™ and then push the card
firmly all the way into the slot.
Close the battery cover.