FujiFilm FINEPIX S1 Series - I MOVIE EDIT

90
Using the Menus: Playback Mode
iMOVIE EDIT
Edit movies.
■ MOVIE TRIMMING
Remove opening or ending footage to create an
edited copy of the current movie.
1
Display the desired movie.
2
Select i MOVIE EDIT in the playback menu,
then select MOVIE TRIMMING. To remove
footage from the start of the copy, proceed to
Step 3; otherwise, proceed to Step 4.
3
Press the selector down to begin playback and
press it down again when the new opening
frame is reached.
4
Press MENU/OK. To remove footage from the
end of the copy, proceed to Step 5; otherwise,
proceed to Step 6.
5
Press the selector down to begin playback
and press it down again when the new closing
frame is reached.
6
Press MENU/OK to save the copy.
■ MOVIE JOIN
Add existing footage to the end of the current
movie to create an edited copy.
1
Display the desired movie.
2
Select i MOVIE EDIT in the playback menu,
then select MOVIE JOIN.
3
Press the selector left or right to highlight a
movie.
4
Press MENU/OK to add the highlighted footage
to the end of the current movie and save the
resulting copy, or press DISP/BACK to exit with-
out creating a copy.
3
Both movies must have been recorded at the same
frame size and frame rate.