S3100
/ S3500
FGS-406106-Ni
BL00405-100
(
1
)
E
Camera Controls
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Still images that can be viewed on the FinePix S3100/FinePix S3500
You can use this camera to view still images recorded on the FinePix
S3100/FinePix S3500 or still images (excluding some uncompressed
images) recorded on a FUJIFILM digital camera that supports xD-
Picture Card.
a/T(Tele zoom) button
b/
W(Wide zoom)
button
DISP (Display)
/ BACK button
MENU/OK button
Low Light
Viewfinder button
Strap mount
Battery cover
d/ Macro button
c/ Flash button
DC IN 5V (Power input)
socket
Strap mount
Flash pop-up button
Slot cover
xD-Picture Card slot
VIDEO OUT (Video output) socket
(USB) socket
Indicator lamp
Viewfinder (EVF)
EVF/LCD
(monitor selector)
button
LCD monitor
Tripod mount
Power switch
Playback mode
Photography mode
Power-OFF MOVIE (Video)
Manual
AUTO
Scene position
Mode dial
Flash control
sensor
Flash
Self-timer lamp
Shutter button
Lens
A. Loading the batteries
01
01
02 03
1. Check that the camera is turned off (indicator lamp is off)
before opening the battery cover.
2. Load the batteries correctly as shown.
3. Press on the battery cover to push the batteries down.
Slide the cover closed.
1. Align the indicators on the
xD-Picture Card slot and
xD-Picture Card and then
push the card firmly all the
way into the slot.
Close the slot cover.
Press “d” or “c” to select the date order.
3. You can select your
preferred date format.
Press “d” or “c” to select
the date order, Year, Month,
Day, Hour or Minute.
Press “a” or “b” to correct
the setting.
Press the “MENU/OK”
button after you complete
the setting.
*
Refer to owner’s manual
for date/time setup.
B. Setting up the camera
2. To turn the camera on, set
the Power switch to “
q”.
*A confirmation message
appears. Press the
“MENU/OK” button to go to
DATE/TIME setting screen.
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
ＮＯＴ ＳＥＴＮＯＴ ＳＥＴ
ＳＥＴＳＥＴ
ＮＯＮＯ
C. Taking pictures
1. Set the Power
switch to “
q”.
2. Press the “EVF/LCD” button to
alternate the display between the
viewfinder (EVF) and the LCD monitor.
Press the “EVF/LCD” button to select
the viewfinder (EVF).
D. Viewing pictures
1. Set the Power switch to “w”.
2. Press “c” to scan forward
through your images.
Press “d ” to scan
backwards.
1 2
3. Press the shutter
button down
halfway to adjust
the focus.
4. Press the shutter button down fully to
take a picture. The camera makes a
“Beep” sound and takes the picture.
3 4
01
02
1
02
２００２００４ １ １１ １
１２ ： ００ ＡＭ１２ ： ００ ＡＭ
ＹＹＹＹ ＭＭ ＤＤＹＹＹＹ ＭＭ ＤＤ
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
ＳＥＴＳＥＴ ＣＡＮＣＥＬＣＡＮＣＥＬＯＫＯＫ
ＢＡＣＫＢＡＣＫ
To Next Page
Need help?
General
