To Next PageTo Next Page
Need help?Do you have a question about the FujiFilm FinePix S3Pro and is the answer not in the manual?
General| Camera type | Digital SLR |
|---|---|
| Max resolution | 4256 x 2848 |
| Image ratio w:h | 3:2 |
| Sensor photo detectors | 12.34 million |
| Sensor size | 23 x 15.5 mm |
| Sensor Type | CCD |
| Lens mount | Nikon F |
| Focal length mult. | 1.5x |
| Screen dots | 235, 000 |
| Max shutter speed | 1/4000 sec |
| Min shutter speed | 30 sec |
| Continuous Shooting | 2.5 fps |
| Viewfinder Type | Optical (pentaprism) |
| Screen size | 2.0 inches |
| Storage types | CompactFlash (Type I or II) |
| Battery | 4 x AA |
| Dimensions | 148 x 135 x 80 mm (5.83 x 5.31 x 3.15 in) |
| Effective pixels | 12.34 million |
Step-by-step instructions for removing the main Printed Wiring Board assembly.
Step-by-step instructions for removing the CCD PWB assembly and CCD unit.
Table indicating adjustments required for specific major part replacements.
Procedure for calibrating the pattern box for camera adjustments.
Steps to configure initial settings within the adjustment software.
Important notes and warnings regarding the adjustment process.
Steps to launch and navigate the adjustment software.
Screen displaying available adjustment functions like CCD Defect Correction and Camera Adjustment.
Procedure for correcting CCD defects, including data acquisition.
Procedure for calibrating camera settings like sensitivity and white balance.
Procedure for adjusting and measuring the camera's battery voltage.
Instructions for downloading firmware updates to the camera.
Procedure for finalizing settings like destination and USB ID.
Critical procedures for inspecting and cleaning the CCD sensor.
Step-by-step guide for performing AF testing.
