To Next PageTo Next Page
Need help?Do you have a question about the FujiFilm FinePix S5800 and is the answer not in the manual?
General| Megapixel | 8 MP |
|---|---|
| Sensor type | CCD |
| Image stabilizer | Yes |
| Image sensor size | 1/2.5 \ |
| Maximum image resolution | 3264 x 2448 pixels |
| Digital zoom | 5.1 x |
| Optical zoom | 10 x |
| Focal length range | 6.33 - 63.3 mm |
| Interface | USB 2.0 |
| Digital SLR | No |
| Camera shutter speed | 4 - 1/1000 s |
| Focal length (35mm film equivalent) | 38 - 380 mm |
| Auto focusing (AF) modes | centre weighted auto focus, continuous auto focus, multi point auto focus |
| Super Macro focusing range | 0.01 - 1.0 m |
| Macro focusing range (tele) | 0.6 - 3.0 m |
| Macro focusing range (wide) | 0.04 - 3.0 m |
| Motion JPEG frame rate | 30 fps |
| Maximum video resolution | 640 x 480 pixels |
| Display diagonal | 2.5 \ |
| Display resolution (numeric) | 230000 pixels |
| I/O ports | A/V |
| Scene modes | beach, Children, Close-up (macro), Documents, Fireworks, Museum, Night, party (indoor), Portrait, Sports, Sunset, Landscape (scenery) |
| Image editing | rotating, trimming |
| White balance | auto, custom modes, daylight, Fluorescent, Incandescent, Shade |
| Camera playback | movie, single image, slide show |
| Self-timer delay | 2 s |
| Product color | Black |
| Battery type | AA / Ni-MH |
| Number of batteries supported | 4 |
| Flash modes | auto, Red-eye reduction, Slow synchronization, suppressed |
| Compatible memory cards | sd, xd |
| Light exposure modes | aperture priority AE, auto, manual, shutter priority AE |
Weight and Dimensions| Depth | 80.7 mm |
|---|---|
| Width | 106.1 mm |
| Height | 75.7 mm |
| Weight | 307 g |
Details the technical specifications of the FinePix S5800/S800 camera model.
Illustrates and names the internal parts of the camera for disassembly reference.
Explains the process of removing the main control Printed Wiring Board (PWB) CP-1.
Details the procedure for removing the lens unit, including associated components and holders.
Guides the user through the process of removing the flash unit and the Electronic Viewfinder unit.
Explains the operation of the Charge-Coupled Device (CCD) peripheral circuits.
Details the operational principles and circuit functions of the CP1 board.
Explains the operation of the Printed Wiring Assembly (PWA) power supply circuits.
Details the operational aspects of the ST1 flash circuit, including charging and firing.
Explains the configuration, functions, and operation of the SYA circuit.
Presents a high-level block diagram of the camera's main functional units and connections.
Illustrates the overall interconnections between major blocks and components of the camera.
Presents the detailed circuit diagram for the CA1 block, showing component interconnections.
Provides crucial guidance on handling image files before performing adjustments or repairs.
Lists adjustments required after replacing major parts like LENS ASSY or COMPL PWB.
Guides the user through the initialization process for the MAIN PWB ASSY after replacement.
Details the procedure for adjusting the camera's autofocus (AF) system using a Siemens Star chart.
Explains the Auto White Balance (AWB) adjustment process, including shutter and AE settings.
Describes how to perform CCD defect detection to identify and correct image sensor flaws.
Details the procedure for CCD Black Defect Detection to identify dark defects in the image sensor.
Provides instructions for updating the camera's firmware using the PC adjustment software.
Outlines the final completion settings, including destination, USB ID, and product mode configuration.
Details the inspection procedures and factory settings to verify camera functionality and calibration.
