FujiFilm instax mini70 - Inserting Camera Batteries

8
EN
Inserting Batteries
Caution
• Use two new CR2 lithium batteries. (All the batteries should be new and be the same brand/type.)
• Insert the batteries before you load the INSTAX mini film pack.
• The battery performance may be reduced when it is cold. In this case, warm up the batteries to room temperature before
using this camera.
~
Ÿ
!
Open the battery lid.
Insert the batteries.
• Insert two CR2 lithium batteries matching the
C
and
D polarities.
Close the battery lid.
BO-7_6lang.indb 8 2015/7/14 8:47:57