FujiFilm X-H2 - Tethered Photography; Tethered Photography Via USB

113
Connections
5
Tethered Photography
The camera can be controlled remotely and photographs
taken from a computer connected via USB or wireless or
wired LAN.
N
This section covers USB connections only. For information on tethered
photography via wireless or wired LAN, visit the website below.
https://fujifilm-dsc.com/en/manual/x-h2_connection/
Tethered Photography via USB
Connect the camera to a computer via USB for tethered photog-
raphy.
1
Select either AUTO or POWER SUPPLY OFF/COMM ON for
USB POWER SUPPLY/COMM SETTING in the network/USB
setting menu.
2
Choose either 3: USB TETHER SHOOTING AUTO or 4: USB
TETHER SHOOTING FIXED for SELECT CONNECTION
SETTING.
O
•
If 3: USB TETHER SHOOTING AUTO is selected, tethered pho-
tography will be enabled automatically when the computer to
which the camera is connected is turned on. When the com-
puter is o or not connected, tethered photography will be sus-
pended and pictures will be saved to the camera memory card.
•
If the camera is disconnected from the computer while 4: USB
TETHER SHOOTING FIXED is selected, it will continue to func-
tion in tethered mode and no pictures will be recorded.
3
Connect the camera to the computer via USB and then turn
the camera on (P 108).