Troubleshooting and tips
10600664372, edition 2 69
The notebook stops working
The notebook is in Standby or Suspend mode
► Reactivate the notebook by pressing a key (Standby mode) or by switching it back on
(Suspend mode).
An application programme has caused the malfunction
► Close the application programme or restart the notebook by switching it on/off or with a warm
boot.
The battery is dead
► Charge the battery.
Or
► Install a charged battery.
Or
► Connect the mains adapter to the notebook.
The printer does not print
► Make sure that the printer is switched on and is on-line (see the manuals supplied with the
printer).
► Check that the cable connecting the notebook and the printer is connected properly.
► Check whether the correct printer driver is loaded (see printer documentation).
To Next Page
Loading...
Need help?
General
