Fujitsu Siemens Computers AMILO Li Series User Manual (English)

Other manuals for Fujitsu Siemens Computers AMILO Li Series

Questions and Answers:

J
Jessica MartinAug 20, 2025
What to do if the external monitor remains blank when connected to Fujitsu Siemens Computers Laptop?
- R
  rboltonAug 21, 2025
  If the external monitor remains blank, first, ensure it's switched on. If power saving is active, press any key. Adjust the monitor's brightness if it's too dark. If the screen output is set to the notebook's LCD screen, press Fn + F4 to switch the screen output. Also, verify that the power and data cables are properly connected to both the monitor and the Fujitsu Siemens Computers Laptop.
T
Taylor HumphreyAug 22, 2025
Why does my Fujitsu Siemens Computers Laptop suddenly stop working?
- W
  william16Aug 22, 2025
  If your Fujitsu Siemens Computers Laptop stops working, it might be in Standby or Suspend mode. Try pressing a key to disable Standby mode, or switch the notebook on to exit Suspend mode. If an application is causing the issue, close it or restart the notebook. Also, ensure the battery isn't dead by charging it, installing a charged battery, or connecting the mains adapter.
V
Victoria RobbinsAug 25, 2025
Why is the external monitor blank or the image unstable on my Fujitsu Siemens Computers Laptop?
- R
  Regina MullenAug 25, 2025
  If the external monitor displays a blank or unstable image when connected to your Fujitsu Siemens Computers Laptop, the wrong external monitor might be selected, or the screen resolution is incorrectly set for the application. Terminate the application by pressing Alt + F4. If the issue continues, switch to the notebook’s internal LCD screen using Fn + F4. Adjust the screen resolution via Startsymbol – (Settings) – Control Panel – Appearance and Personalization – Personalization: Adjust screen resolution. To select the monitor, right-click the desktop, choose screen 1 or 2 via Personalization – Display Settings, and select the correct monitor via Advanced Settings – Monitor.
W
Wesley StricklandAug 26, 2025
What to do if the LCD screen remains blank on a Fujitsu Siemens Computers Laptop?
- M
  Margaret HarperAug 26, 2025
  If your Fujitsu Siemens Computers Laptop's LCD screen remains blank, try pressing any key or entering your password, as the monitor might be switched off. If you have an external monitor or television connected, press Fn + F4 to switch the screen output.
D
David DukeAug 27, 2025
What to do if the Fujitsu Siemens Computers Laptop stops working?
- N
  Natalie WhitakerAug 27, 2025
  If your Fujitsu Siemens Computers Laptop stops working, it could be due to several reasons. First, the notebook might be in Standby or Suspend mode; try disabling Standby mode by pressing a key, or switch the notebook on to exit Suspend mode. Another possibility is that an application program has caused a malfunction; close the application or restart the notebook. Finally, the battery might be dead; charge the battery, install a charged battery, or connect the mains adapter to the notebook.
J
Jasmine ClarkeAug 29, 2025
Why the external monitor remains blank with Fujitsu Siemens Computers AMILO Li Laptop?
- H
  Howard MoodyAug 30, 2025
  If the external monitor remains blank when connected to your Fujitsu Siemens Computers Laptop, there are several potential causes. Ensure the monitor is switched on. Check if power saving has been activated; if so, press any key to continue. Verify that the brightness isn't set too low, and adjust it to a brighter setting. Make sure the screen output is correctly set by pressing Fn + F4 to switch screen output. Finally, check the power and data cables to ensure they are properly connected to both the notebook and the monitor; switch off the external monitor and the notebook, check the connections, and then switch them back on.
J
Joanne HansenAug 31, 2025
How to fix an unreadable LCD screen on Fujitsu Siemens Computers AMILO Li?
- T
  toddcortezAug 31, 2025
  If the LCD screen on your Fujitsu Siemens Computers Laptop is difficult to read, it may be due to reflected glare. Try turning the notebook or adjusting the tilt of the LCD screen to reduce the glare.
D
David West DVMSep 2, 2025
What to do if the Fujitsu Siemens Computers AMILO Li Laptop's LCD screen remains blank?
- L
  lindseythomasSep 2, 2025
  If your Fujitsu Siemens Computers Laptop's LCD screen remains blank, it could be that the monitor is switched off. Try pressing a key or entering your password. Alternatively, an external monitor or television set might be connected. In this case, press the key combination Fn + F4 to switch the screen output.
C
Chelsea WalkerSep 3, 2025
How to resolve external monitor blank or unstable image on Fujitsu Siemens Computers Laptop?
- V
  Valerie RodriguezSep 4, 2025
  If the external monitor displays a blank or unstable image with your Fujitsu Siemens Computers Laptop, the wrong external monitor may have been selected, or the screen resolution may be incorrectly set for the application program. Terminate the application program in Windows by pressing Alt + F4. If the problem persists, switch to the notebook’s internal LCD screen using Fn + F4. Then, select the correct monitor or set the correct screen resolution.
P
patricia93Sep 5, 2025
How to fix Fujitsu Siemens Computers Laptop printer that does not print?
- J
  James MccartySep 6, 2025
  If your Fujitsu Siemens Computers Laptop printer is not printing, ensure the printer is switched on and online. Check that the cable connecting the notebook and the printer is properly connected. Also, verify that the correct printer driver is loaded.