Connecting external devices
!
Under all circumstances, please observe the safety notes provided in the "
Important notes"
chapter before connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect, or disconnect cables during a thunderstorm.
Never pull on a cable when disconnecting it. Always hold the plug.
Follow the steps below in order, when connecting or disconnecting devices to your
notebook:
Connecting devices to notebook
1. Switch the notebook and all external devices off.
2. Unplug your notebook and all devices from the mains sockets.
3. Connect the cables for your external devices following the supplied instructions.
4. Plug all power cables into the mains sockets.
Disconnecting devices from notebook
1. Switch the notebook and all external devices off.
2. Unplug your notebook and all devices from the mains sockets.
3. Disconnect the cables for your external devices following the supplied instructions.
Some of the external devices require special drivers (see the operating system and
external device documentation).
i
10600718714, edition 1 43
To Next Page
Loading...
Need help?
General
