Removing and installing components during servicing
► Hold the drive tray in the centre on both
sides and carefully pull the CD/DVD drive
with the drive tray out of the drive bay.
► Push the drive tray into the removed CD/DVD drive again until you feel it locking into place.
Installing the CD/DVD drive
► Carefully push the CD/DVD drive with the
drive tray into the notebook in the direction
of the arrow.
► Tighten the screw.
► Install the battery (see "Inserting the battery").
► Turn the notebook over and place it on a flat surface.
► Reconnect the cables that you disconnected before.
10600718714, edition 1 53
To Next Page
Loading...
Need help?
General
