Working with the notebook
Ethernet and LAN
The internal LAN module of your notebook
supports Ethernet-LAN (10/100 Mbps). With the
LAN module you can establish a connection to a
local network (LAN = Local Area Network).
2
1
► Connect the LAN cable to the LAN port
of the notebook (1).
► Connect the LAN cable to your network
connector (2).
Your network administrator can help you to configure and use the LAN-connections.
i
Wireless LAN
The installation of a wireless LAN module not approved by Fujitsu Siemens
Computers GmbH voids the permits (CE!, FCC) issued for this device.
i
Wireless LAN is integrated in your notebook.
Switching wireless LAN module on and off
Check whether the wireless LAN module is activated/deactivated in the installed wireless
LAN software.
i
The wireless LAN indicator lights up when the
wireless LAN module is switched on.
► Press the on/off switch for wireless LAN to
switch the wireless LAN module on/off.
Pay attention to the additional safety notes for devices with wireless LAN provided in the
"Safety" manual.
i
More detailed information on the use of Wireless LAN can be found in the "Wireless LAN"
manual. You can find the manual as a PDF file on your notebook or on the “Drivers &
Utilities” CD/DVD or on our website.
38 10600718714, edition 1
To Next Page
Loading...
Need help?
General
