Initial switch-on: Software will be installed Preparing for use
A26361-K520-Z300-3-7619 17
Switching on monitor and PC
Ê Switch the monitor on (see the operating manual for the monitor).
Ê Switch the PC on. To do this, follow the instructions below.
2
3
0
I
1
1 = Main power switch
2 = Power button
3 = Power-on indicator
0 = PC is switched off
I = PC is ready-to-operate
Ê Switch the PC on with the main power switch on the back panel if present.
Ê Press the ON/OFF switch on the front of the casing.
The power-on indicator lights green and the PC is started.
Installing the software
Ê During installation, follow the instructions on screen.
Consult the operating system manual if there is anything unclear about the requested input data.
i
You will find further information about the system, drivers, utilities, updates, manuals etc.
on the "Drivers & Utilities" CD supplied.
To Next Page
Loading...
Need help?
General
