Fujitsu Siemens Computers SCENIC Edition X100 User Manual

65 pages

To Next Page

Operating manual

SCENIC Edition X100 / SCENIC Edition X102

English

answers

Operating Manual5
Table of Contents7
Your SCENIC Edition X100 / SCENIC Edition X1029
A26361-K678-Z12110
Notational Conventions10
Important Notes11
Safety Notes11
- Energy Saving, Disposal and Recycling11
- CE Marking11
FCC Class B Compliance Statement12
Transporting the PC13
Cleaning the PC13
Preparing for Use15
Unpacking and Checking the Delivery15
Steps for Initial Setup15
Setting up the PC16
Connect the Monitor, Mouse and Keyboard16
- Connecting the Monitor17
- Connecting the Mouse17
- Connecting a Keyboard18
Connecting the PC to the Mains Voltage19
Initial Switch-On: Software will be Installed20
- Switching on Monitor and PC21
- Installing the Software22
Connecting External Devices23
- Ports24
- Connecting External Devices to the Serial Port25
- Connecting External Devices to the Parallel Port25
- Connecting External Devices to the USB Ports26
Operation27
Switching on the PC27
Switching off the PC27
Indicators on the PC28
Keyboard29
- Important Keys and Key Combinations30
Working with Floppy Disks31
Settings in BIOS Setup32
Property and Data Protection32
- Anti-Theft Protection32
- BIOS Setup Security Functions33
- Access Authorisation Via Smartcard33
- Access Protection with Systemlock33
Troubleshooting and Tips35
Installing New Software35
Power-On Indicator Remains Unlit after You Have Switched on Your Device35
The Screen Stays Blank36
No Mouse Pointer Displayed on the Screen37
The Floppy Disk Cannot be Read or Written37
Time And/Or Date Is Not Correct38
Error Messages on the Screen38
Restoring the Hard Disk Contents38
Tips38
System Expansions39
Information about Boards39
Opening the Casing40
Closing the Casing40
Installing and Removing a Board41
- Installing a Board41
- Removing a Board43
Low-Profile Boards45
- Mounting Slot Adapter45
- Removing Slot Adapter45
Installing and Removing Drives46
- Installing an Accessible Drive46
- Removing an Accessible Drive48
- Replacing the Floppy Disk Drive49
- Installing/Removing Hard Disk Drive with Easychange Rails50
- Installing/Removing Hard Disk Drive with Screws52
- Installing/Removing Hard Disk Drive and Drive Cage with Screws54
Extensions to the Mainboard56
- Removing the Power Supply56
- Upgrading Main Memory57
- Replacing the Processor57
- Replacing Lithium Battery58
- Installing the Power Supply59
Technical Data61
Index63

Need help?

Do you have a question about the Fujitsu Siemens Computers SCENIC Edition X100 and is the answer not in the manual?

Fujitsu Siemens Computers SCENIC Edition X100 Specifications

General

Processor Speed	Up to 3.06 GHz
RAM	Up to 2 GB
Expansion Slots	2 x PCI
Front Ports	2x USB 2.0, headphone, microphone
Rear Ports	4x USB 2.0, VGA, Ethernet, serial, parallel
Operating System	Windows XP Home

Related product manuals

Fujitsu Siemens Computers SCENIC Edition X100 User Manual

Table of Contents

Fujitsu Siemens Computers SCENIC Edition X100 Specifications

Related product manuals