EasyManuals Logo

Fujitsu Siemens Computers SCENIC xB User Manual

Fujitsu Siemens Computers SCENIC xB
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Troubleshooting and tips
A26361-K520-Z300-3-7619 33
Tips
The PC cannot be switched off with the power button
Cause: The PC was not switched on with the power button.
Ê Press the power button again.
Cause: System crash
Ê Press and hold the power button for at least four seconds until the device switches off.
Out of system resources
If you have too many applications running at once, you may experience problems due to a lack of
system resources. In this case you should:
Ê close unnecessary applications
or
Ê run the applications in a different order
BIOS settings in Power Management are not activated (Windows 98 with APM function)
The Auto insert notification setting may be active for the CD-ROM drive. This setting causes
Windows 9x to inquire about any modifications on the drive at regular intervals. Because of this the
timer for the idle time cannot time out.
To activate power management, proceed as follows:
Ê In Windows 9x, select Start - Settings - Control Panel - System.
Ê Select the Device Manager tab. Click on the plus sign preceding the CD-ROM entry.
Ê Select the installed CD-ROM drive from the list (double-click).
Ê Select Settings.
Ê Deactivate the Auto insert notification box.
Ê Select OK and then Close. Confirm the reboot of the computer with Yes.
Other manuals
Other manuals are contained on the "Drivers & Utilities" CD.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu Siemens Computers SCENIC xB and is the answer not in the manual?

Fujitsu Siemens Computers SCENIC xB Specifications

General IconGeneral
BrandFujitsu Siemens Computers
ModelSCENIC xB
CategoryDesktop
LanguageEnglish

Related product manuals