The [Multi Image] dialog box appears.
3. Select [Auto Color Detection] under [Output mode].
4. Under [Select Current Image Setting], select a side, and then configure settings for each side in
the [TWAIN Driver] dialog box.
You need to configure both of the settings for [Color/Grayscale] detection and for [Binary] detection in advance.
5. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_12_01.htm (2 of 3)9/28/2007 2:38:36 PM
To Next Page
Loading...
