6. Specify the created batch profile, and then perform the batch scan.
For how to perform the batch scan, see "
Batch Scan" in Section "2.6 How to Use ScandAll PRO."
HINT
When storing each of the scanned documents, which are separated with patch-code sheets,
in separate folders, change the settings in the [Name Rule] dialog box opened by clicking the
[Name Rule] button on the [File format and Name scheme] tab in the [Profile Editor] dialog
box.
Mark the [Create Directories Separately] checkbox in the [Name Rule] dialog box.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_16_01.htm (3 of 4)9/28/2007 2:39:14 PM
To Next Page
Loading...
