● Sensor
[L] and a number are displayed alternately.
Indication Meaning Remedy
L6 Ultrasonic sensor error When a device alarm is indicated, turn the scanner off and on.
If the alarm is still displayed on the Function Number Display, record
the indicated error code, and contact the store where you purchased
the scanner or an authorized FUJITSU scanner service provider.
All Rights Reserved. Copyright 2007 © PFU LIMITED
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/06/c06_02_01.htm (4 of 4)9/28/2007 2:37:40 PM
To Next Page
Loading...
Need help?
General