(When using scanner on SCSI interface)
Is the SCSI ID set correctly?
NO
Turn OFF the scanner and set the SCSI ID
correctly, then turn ON the scanner again.
(Refer to "2.2 Connecting the Scanner to Your
PC" in "fi-6140/fi-6240 Getting Started.")
YES
Does the scanning start after running ON the
scanner again?
YES
The scanner operation is normal.
NO
If you cannot solve the problem after taking
measures, check the items in Section "
6.4
Items to Check Before Contacting the Dealer
Where You Bought the Scanner" and contact
the dealer or an authorized FUJITSU scanner
service provider.
All Rights Reserved. Copyright 2007 © PFU LIMITED
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/06/c06_03/03.htm (2 of 2)9/28/2007 2:37:44 PM
To Next Page
Loading...
Need help?
General