B: From the menu (Method 2)
1. Place the document on the scanner.
For information about how to place documents, see Section "
2.2 Loading Documents on the ADF for Scanning."
2. From the [Scan] menu, select [Batch Scan], and then select [a profile name you want to
use].
A document is scanned with the scanner, and the scanned document image is displayed on the ScandAll
PRO window, and then the image is saved to file.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/02/c02_06_01.htm (13 of 15)9/28/2007 2:38:17 PM
To Next Page
Loading...
