To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu ABYG36LRTE and is the answer not in the manual?
General| Cooling Capacity | 10.0 kW |
|---|---|
| Heating Capacity | 11.2 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Refrigerant | R410A |
| Power Supply | 50 Hz |
| Outdoor Unit Noise Level | 53 dB(A) |
Overview of available indoor and outdoor unit models and their configurations.
Detailed specifications for various indoor unit types including dimensions, airflow, and performance.
Dimensional drawings and installation space requirements for different indoor unit types.
Wiring diagrams illustrating connections for various indoor unit types.
Air velocity and temperature distribution charts for compact cassette, cassette, and slim duct units.
Fan performance curves (airflow vs. static pressure) for slim duct and duct units.
Airflow rates for compact cassette, cassette, and slim duct units in different modes.
Noise level curves (sound pressure vs. frequency) for compact cassette and cassette units.
Electrical specifications including power supply, MCA, and wiring for indoor units.
Details on safety devices such as PCB fuses and fan motor thermal protectors.
List of accessories for compact cassette and cassette indoor units.
Specifications for outdoor units including power, capacity, airflow, and dimensions.
Dimensional drawings for outdoor units AOYG72LRLA and AOYG90LRLA.
Guidelines for single and multiple outdoor unit installation space requirements.
Refrigerant circuit diagrams for twin, triple, and double twin configurations.
Wiring diagrams for outdoor units AOYG72LRLA and AOYG90LRLA.
Cooling capacity tables for AOYG72LRLA and AOYG90LRLA across various conditions.
Compensation rate tables based on piping length and height difference for outdoor units.
Noise level curves for outdoor units in cooling and heating modes.
Electrical characteristics for outdoor units including power supply and breaker capacity.
Safety devices for outdoor units, including circuit protection and compressor protection.
Guidelines for prohibited installation locations and points to remember for indoor and outdoor units.
Important items for using R410A refrigerant, piping limitations, and pipe size selection.
Cautions for piping, procedures for connecting pipes, and branch pipe selection.
Precautions for electrical wiring, power supply cable specs, and control patterns.
Procedures for setting indoor unit parameters like address and primary/secondary configuration.
Overview and specifications for wireless, wired, and simple remote controllers.
Procedures for setting indoor unit functions via DIP switch, wireless, and wired controllers.
Procedures and checklists for test runs, error codes, and pump down operations.
Specifications and installation guides for various optional parts like drain pumps and fresh air kits.
Specifications and dimensions for various branch pipe models.
Overview and lineup of available wired, wireless, and simple remote controllers.
Lineup and parts information for cassette grilles.
Lineup of various other optional parts like shutter plates, filters, and sensors.
