En-11
TEMPERATURE SET BACK TIMER
Press the SET BACK button to change to the SET BACK con-
fi rmation display.
The SET BACK operating time and the set temperature will be
displayed.
2
Press the TIMER SET button
for 2 seconds or more.
1
3
Day setting
Operating time setting
Follow the same procedures to set the operating time as those for the weekly timer. The TIMER DELETE button is also used
as described in the procedures for the weekly timer.
4
NOTES
• The SET BACK timer only changes the set temperature, it cannot be used to start or stop air conditioner operation.
• The SET BACK timer can be set to operate up to 2 times per day but only 1 temperature setting can be used.
• The SET BACK timer can be used together with the ON, OFF, and weekly timer functions.
• The SET BACK operating time is displayed only in the SET BACK confi rmation display. (Refer to step 1 for the SET BACK
confi rmation display.)
SET BACK
ex. When setting all days together
Temperature setting
Press the SET TEMP. buttons to set the
temperature. (The temperature setting range
is the same as the range for the operation
mode.)
ex. Operating time 15:00–22:00
5
Repeat steps 3 and 4.
Press the TIMER SET button for
2 seconds or more to complete
the temperature SET BACK timer
settings.
To start
SET BACK
Press the SET BACK button. The SET BACK confi rmation display appears for
5 seconds, and then the timer starts automatically.
ex. Display during SET BACK timer operation
(The operating time will not be displayed.)
To cancel
Press the SET BACK button, and then
press the TIMER DELETE button while
the SET BACK confi rmation display is
displayed. Even if the SET BACK button
is pressed again, the SET BACK timer
will be cancelled.
If there is no existing
SET BACK tempera-
ture setting, “- -” will
be displayed for the
temperature.
1
3
2
4
1
2
Temperature SET BACK timer setting
Temperature SET BACK timer operation
24°C
24°C
28°C
SET BACK temperature
Normal temperature
ON OFF
Note: In simultaneous multi connection, this function by using the wireless remote controller cannot be used.
9374379705_OM.indb Sec1:119374379705_OM.indb Sec1:11 6/26/2013 4:44:10 PM6/26/2013 4:44:10 PM
To Next Page
Loading...
Need help?
General
