To Next PageTo Next Page
What to do if my Fujitsu Air Conditioner remote is not working due to a communication error?
If you're experiencing a Wired Remote Controller Communication Error with your Fujitsu Air Conditioner, check the voltage. If it's DC12V, the remote control has failed and should be replaced. If it's DC 0V, the Controller PCB has failed and should be replaced after rechecking the remote control.
What to do if my Fujitsu Air Conditioner has a drainage error?
If your Fujitsu Air Conditioner is experiencing drainage issues, start by inspecting the float switch for proper operation using a meter to check its on/off switching. If the float switch is defective, replace it. Also, examine the drain hose for any clogs and clear them if necessary. If these steps don't resolve the issue, consider replacing the controller PCB.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R410A |
| Indoor Unit Dimensions (WxHxD) | 790 x 275 x 202 mm |
| Outdoor Unit Dimensions (WxHxD) | 660 x 530 x 240 mm |
| Indoor Unit Weight | 9 kg |
| Energy Efficiency Ratio (EER) | 11 BTU/W |
| Indoor Unit Noise Level | 21 dB |
| Cooling Capacity | 12000 BTU/h |
