Fujitsu AO*54LJBYL User Manual

08-12
DIP SWITCH SETTING
ROTARY SWITCH SETTING (SW2)
JUMPER WIRE SETTING
Auto restart function can be selected by turning this switch ON/OFF.
AUTO RESTART SETTING
SW1-1. Auto restart setting
( Factory setting)
Decide the heating temperature correct coefficient vale of heating.
If the setting for a low ceiling is selected, the capacity of the air
conditioner decreases slightly.
TEMPERATURE CORRECTION
SW1-2, 1-3. Room temperature correct coefficient of heating.
( Factory setting)
SW 1-1
SW state
OFF
Invalidity
ON
Validity
0 deg
0 deg
0 deg
cooling
-2 deg
SW 1-2
SW 1-3
0 deg
heating
dry
-2 deg
-2 deg
ON
ON
ON
OFF
OFF
+2 deg
-2 deg
OFF
SW state
-2 deg
OFF
ON
0 deg
+4 deg
SW4-2, 4-3. Ceiling height setting
SW4-1. Dip SW 4-1setting forbidden
( Factory setting)
( Factory setting)
SW 4-1
OFF
3
OFF
-
ON
Less than 2.5
Normal
High ceiling 1
High ceiling 2
Low ceiling
-
ON
ON
3.0-3.5
More than 3.5
-
OFF
-
ON
OFF
2.5-3.0
OFF
Ceiling height(m)
DIP - SW4
1
2
This switch can be used when group control system.
Set the indoor unit address in the 0,1,-,15 order.
( Factory setting)
0
Single
1 - 15
Indoor unit address
SW 2
SW state
( Factory setting)
Connect
Disconnect
JM 1,2,3
SW state
JM 1, 2, 3 setting forbidden
Forbidden

Fujitsu AO*54LJBYL Specifications

General

Brand	Fujitsu
Model	AO*54LJBYL
Category	Air Conditioner
Language	English