Need help?Do you have a question about the Fujitsu AOU18RLB and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240 V, 50 Hz |
| Weight (Outdoor Unit) | 36 kg |
| Cooling Capacity | 5.0 kW |
| Type | Split System |
Covers various protection controls like discharge gas temperature, current release, and antifreeze.
Lists error codes and corresponding indicator lamp patterns for indoor and remote units.
Provides detailed troubleshooting steps for specific error codes detected by the system.
Offers guidance for troubleshooting issues without specific error codes displayed.
Steps to diagnose and resolve errors originating from the outdoor unit's main PCB.
Diagnosing and resolving errors associated with the Intelligent Power Module (IPM).
Steps to resolve errors related to the input current sensor in the outdoor unit.
Diagnosing errors in the compressor motor control, such as phase issues or repeated stops.
Troubleshooting for errors related to excessive discharge temperature in the compressor.
Guides on troubleshooting when the indoor unit does not receive power.
Troubleshooting steps for when the outdoor unit does not receive power.
Steps to diagnose why the unit is not operating despite having power.
Comprehensive troubleshooting for when the unit fails to cool or heat.
Diagnosing the cause of abnormal noises originating from the indoor or outdoor units.
Troubleshooting steps for water leaks from the unit, including drain hose issues.
Steps to address situations where the room is too warm, involving function settings and sensor checks.
Troubleshooting for situations where the room is too cool, focusing on function settings and sensor checks.
To Next Page
