Need help?Do you have a question about the Fujitsu AOU30RGLX and is the answer not in the manual?
General| Cooling Capacity (BTU/hr) | 30, 000 |
|---|---|
| Heating Capacity (BTU/hr) | 30, 000 |
| Energy Efficiency Ratio (EER) | 11.5 |
| Coefficient of Performance (COP) | 3.5 |
| Refrigerant | R410A |
| Voltage | 208/230V |
| Cooling Capacity | 8.8 kW |
| Heating Capacity | 8.8 kW |
Detailed technical specifications for indoor and outdoor units, covering capacity, power, and performance.
Provides detailed dimensional drawings and measurements for indoor and outdoor units.
Important safety and handling precautions for servicing the air conditioning equipment.
Lists and illustrates the various parts of the indoor units, with part numbers for each model.
Details and illustrates the components of the outdoor units, categorized by model series.
Illustrates the refrigerant flow for cooling and heating operations in the outdoor units.
Provides electrical wiring diagrams for outdoor units, showing component connections.
Detailed diagrams of PC boards, showing component layouts and connections for outdoor units.
Explains how error codes are displayed on the wired remote control and outdoor unit LEDs.
Provides step-by-step troubleshooting for various error codes encountered during operation.
Offers troubleshooting steps for operational issues without specific error codes.
Details compressor frequency control mechanisms during startup and operation modes.
Outlines indoor fan speed settings based on operation mode and airflow volume.
Describes outdoor fan speed settings based on operation mode and outdoor temperature.
Details the functions and operation of wired and wireless remote control timers.
Explains conditions and procedures for defrost operation initiation and completion.
Provides instructions for performing pump down operation for refrigerant recovery.
Explains how to adjust indoor unit functions via DIP switches and remote controller settings.
Explains setting methods for outdoor unit functions using DIP switches and push buttons.
Outlines the procedure for performing test runs on the air conditioning system.
Explains how to configure external inputs and outputs for controlling the unit.
Shows combinations of function settings and switch settings for external input/output.
Provides detailed explanations of various control input and output functions.
To Next Page
