To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu AOU48RLAVM4 and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Refrigerant | R410A |
| Voltage | 208/230 V |
| Phase | 1 |
| Compressor Type | Inverter |
| Cooling Capacity | 48000 BTU/h |
| SEER | 16.0 |
| HSPF | 9.0 |
| Power Supply | 208/230V, 60Hz |
| Heating Capacity | 54000 BTU |
General safety advice covering wiring, transport, and installation locations.
Important considerations and warnings when working with R410A refrigerant.
Guidance on choosing a suitable and safe location for the outdoor unit.
Specifies the necessary clearances and space for proper installation and ventilation.
Steps and guidelines for physically mounting and securing the outdoor unit.
Provides criteria and tables for selecting appropriate refrigerant piping.
Instructions and precautions for brazing refrigerant pipes safely and effectively.
Detailed steps for connecting refrigerant pipes, including flaring and torque.
Procedures for correctly flaring refrigerant pipes using specialized tools.
Specific instructions for making secure and leak-free pipe connections.
Critical safety warnings and guidelines for performing electrical wiring.
Procedure for testing refrigerant pipes for leaks using pressure.
Steps for evacuating the refrigerant system using a vacuum pump.
Instructions for adding refrigerant to the system.
Verifies correct indoor unit connection before starting operation.
Procedures for conducting cooling and heating test runs.
Lists and describes error codes indicated by LEDs and the 7-segment display.
