Fujitsu AOYG36LMTA User Manual

- 40 -
WALL MOUNTED ASYG30, 36LMTA
 Contents of function setting
Each function setting listed in this section is adjustable in accordance with the installation environ-
ment.
NOTE: Setting will not be changed if invalid numbers or setting values are selected.
1) Remote controller address setting
NOTE: Because this setting is normally done automatically when 2-wire-type wired remote
controller is installed, setting is unnecessary.
Multiple indoor units can be operated by using one wired remote controller.
Set the unit number of each indoor unit.
NOTES:
• When connecting Polar 3-core wired remote controller, set the remote controller address in the
order of 0, 1, 2, ....., and 15.
• When different type of indoor units (such as wall-mounted type and cassette type, cassette type
and duct type, or other combinations) are connected using group control system, some functions
may no longer be available.
Function no. Functions
1)
00
Remote controller address setting
2)
11
Filter sign
3)
30/31
Room temperature control for indoor unit sensor
4)
35/36
Room temperature control for wired remote controller sensor
5)
40
Auto restart
6)
42
Room temperature sensor switching
7)
44
Remote controller custom code
8)
46
External input control
9)
48
Room temperature sensor switching (Aux.)
10)
49
Indoor unit fan control for energy saving for cooling
11)
60
Switching functions for external output terminal
12)
96
Server room control
Function number Setting value Setting description Factory setting
00
00 Unit no. 0 ♦
01 Unit no. 1
02 Unit no. 2
03 Unit no. 3
04 Unit no. 4
05 Unit no. 5
06 Unit no. 6
07 Unit no. 7
08 Unit no. 8
09 Unit no. 9
10 Unit no. 10
11 Unit no. 11
12 Unit no. 12
13 Unit no. 13
14 Unit no. 14
15 Unit no. 15

Fujitsu AOYG36LMTA Specifications

General

Brand	Fujitsu
Model	AOYG36LMTA
Category	Air Conditioner
Language	English