Fujitsu ARHG09LLTA

6. SYSTEM DESIGN
FUNCTION SETTING

 Press the an button so that the unction nuber dispa ashes. hen press either
the "Set Temp.
p
" button or the "Set Temp.
q
" button to set up the function number.
Function number
 Press the an button so that the etting nuber dispa ashes. hen press either the
Set Temp.
p
button or the Set Temp.
q
button to set up the setting number.
Ex.) Function number : 30, Setting number : 01
Setting number
 Pressing the tarttop button conr the setting.
(The data will be transferred to the indoor unit.)
ERROR
When the data was correctly set up on the indoor
unit.
When the data was not set up on the indoor 
unit "--" is displayed.
Set up the data again according to the 
procedure in step 3), 4) above.
GOOD
FUNCTION DETAILS

Refer to 5-6. FUNCTION DETAILS
- (06 - 82) -
SYSTEM DESIGN SYSTEM DESIGN