6. SYSTEM DESIGN
13) Indoor unit fan control for energy saving for cooling
Enable or disables the power-saving function by controlling the indoor unit fan rotation when
the outdoor unit is stopped during cooling operation.
(
... Factory setting)
Setting description Function number Setting value
Disable
49
00
Enable 01
00: When the outdoor unit is stopped, the indoor unit fan operates continuously following the
setting on the remote controller.
01: When the outdoor unit is stopped, the indoor unit fan operates intermittently at a very low
speed..
- (06 - 87) -
SYSTEM
DESIGN
SYSTEM
DESIGN
To Next Page
Loading...
