Fujitsu ARTG65LHTA - Auto-Off Timer Setting

When you return to the “Monitor” screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Cool
Monitor
High
°
C
26
Menu
Weekly timer : Weekly 1
Mo 10:00
End :
Zone
(
single
)
z
4-2-4. Auto-o󰀨 timer setting
1
In “Timer” screen, select [Auto-o󰀨 timer] with the [Cursor
button (Up/Down)], and press the [Enter button].
Function
Timer
On timer
Off timer
Weekly timer
Auto-off timer
Disable
Disable
Disable
Mo 10:00
Disable
Setting:
Back:
2
“Auto-o󰀨 timer” screen is displayed.
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Disable
30min.
Start End
Mo 10:00
0:00 0:00
Back:
Setting:
Weekly timer
On timer
To change the setting, select the item with the [Cursor
button (Up/Down)], and press the [Enter button].
3
For [Enable/Disable setting], select [Enable] or [Disable]
with the [Cursor button (Up/Down)], and press the [Enter
button] to complete the setting.
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Enable
30min.
Start End
Mo 10:00
0:00 0:00
Weekly timer
On timer
Cancel:
OK:
4
For [Stop in], adjust the timer with the [Cursor button (Up/
Down)]. To complete the setting, press the [Enter button].
On timer Weekly timer
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Enable
120 min.
End
Mo 10:00
0:00
0:00
OK:
Cancel:
Start
NOTE
• The set time can be set from 30 to 240 minutes in units of
10 minutes.
5
For [Valid hour], applicable time slot for the Auto-o󰀨 timer
can be set.
Set the time with the [Cursor button (Up/Down)], and
press the [Enter button].
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Enable
120 min.
Start
End
Mo 10:00
00 6
0:00
Weekly timer
On timer
Cancel:
OK:
NOTES
• Counting down of the Auto-o󰀨 timer is valid only if the
air conditioning operation has been started with the [On/
O󰀨 button] of this remote controller. When Auto-o󰀨 timer
become active, following message is displayed on the
screen.
Menu
Auto-off timer start
• Even if the valid hour is ended during Auto-o󰀨 timer is
working, the function will work after the set time in [Stop in]
elapsed.
• The timer started counting down within the valid hour of the
function, even if the current time is being out of the valid
hour during the counting down, the function works.
• If the air conditioning operation is On by Weekly timer after
counting down of Auto-o󰀨 timer has started, the Auto-o󰀨
timer will not work.
En-20
9381067213-01_OM_En_200904.indd 20 2020/09/04 10:21:48