Fujitsu ARTG65LHTA - Screen Setting; Automatic off Time Setting; Brightness Setting

2
“Change display format” screen is displayed. Select the
setting items (Date format or Time format) with the [Cur-
sor button (Left/Right)] and set with the [Cursor button
(Up/Down)].
Time
Date format
Change display format
Day/Month/Year
0:00
–
23:59
Time format
Date
Mo 10:00
Cancel:
OK:
Available display formats are as follows:
Date format: Time format:
• Day/Month/Year • 0:00-23:59
• Month/Day/Year • 0:00-11:59 AM/PM
• Year/Month/Day • 12:00-11:59 AM/PM
To complete the setting, press the [Enter button].
The screen returns to the “Date and Time” screen.
5-3. Screen setting
In “Submenu” screen, select [Screen] with the [Cursor button
(Up/Down)], and press the [Enter button].
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo 10:00
Setting:
Back:
Submenu
[
1/2
]
“Screen” screen is displayed.
Automatic
off time
30S
Screen
Brightness
Contrast
Mo 10:00
Date and time
Filter sign
OK:
Cancel:
z
5-3-1. Automatic o󰀨 time setting
1
In “Screen” screen, select [Automatic o󰀨 time] with the
[Cursor button (Left/Right)], and set with the [Cursor
button (Up/Down)].
Automatic
off time
30S
Screen
Brightness
Contrast
Mo 10:00
Date and time
Filter sign
OK:
Cancel:
Congurable values of [Automatic o󰀨 time] are as follows:
• 30s
• 60s
• O󰀨 (No illumination)
NOTE
• When the backlight is turned o󰀨 by the [Automatic o󰀨 time],
the rst button operation is not e󰀨ective, and illuminates the
backlight.
If [Automatic o󰀨 time] is set to [O󰀨], it is e󰀨ective from the
rst button operation.
2
Other screen setting items can be set continually. To
complete the setting, press the [Enter button].
Screen returns to the “Submenu” screen.
z
5-3-2. Brightness setting
1
In “Screen” screen, select [Brightness] with the [Cursor
button (Left/Right)], and set with the [Cursor button
(Up/Down)].
30S
Screen
Automatic
off time
Brightness
Contrast
Mo 10:00
Date and time
Filter sign
Cancel:
OK:
NOTES
• The set is reected while setting it.
• When the automatic o󰀨 time setting is set in “O󰀨”, Brightness
setting is not displayed (It is not possible to set it).
2
Other screen setting items can be set continually. To
complete the setting, press the [Enter button].
Screen returns to the “Submenu” screen.
En-23
9381067213-01_OM_En_200904.indd 23 2020/09/04 10:21:49