– 16 –
1.3.16 HORIZONTAL AIR DIRECTION ADJUSTMENT
Each time the button is pressed, the air direction range will change as follows:
1.3.17 VERTICAL AIRFLOW SWING OPERATION
• The range of swing is relative to the currently set airflow direction.
The Remote Controller's display does not change.
• Use the air direction adjustments within the ranges shown above.
• If the swing range is not as desired, use the Remote Control Unit's AIRFLOW DIRECTION VERTICAL SET button to change
the range of swing.
• The SWING Operation may stop temporarily when the air conditioner's fan is not operating, or when operating at very low
speeds.
• During use of the Cooling and Dry modes, do not set the Air UP/DOWN Direction Flaps, in the Heating range (t to u) for long
periods of time, since water vapor may condense near the outlet louvers and drops of water may drip from the air conditioner.