Fujitsu AST9RSHCW User Manual

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

KEEP THIS OPERATION MANUAL

FOR FUTURE REFERENCE

FUJITSU GENERAL LIMITED

OPERATING MANUAL

P/N9309868014-01

Indoor Unit

AST9RSHCW

AST12RSHCW

Outdoor Unit

AOT9RSHC

AOT12RSHC

HEAT & COOL MODEL

(REVERSE CYCLE)

ROOM AIR CONDITIONER

WALL MOUNTED TYPE

Questions and Answers:

D
Dwayne SchroederJul 29, 2025
Why is my Fujitsu Air Conditioner cooling performance poor?
- M
  Michael SchmidtJul 30, 2025
  Poor cooling performance in your Fujitsu Air Conditioner can stem from several factors. First, ensure the air filter isn't dirty. Check that the air conditioner's intake grille or outlet port is not blocked. Verify that the room temperature settings (thermostat) are correctly adjusted. Also, make sure no windows or doors are open, and close curtains to block bright sunlight. Finally, consider if there are too many people or heating apparatus in the room, or if the unit is set to SUPER QUIET operation.
M
Mr. Andrew Curry MDAug 3, 2025
Why does my Fujitsu AST9RSHCW Air Conditioner airflow is weak?
- S
  Sara MooreAug 3, 2025
  Weak or absent airflow in your Fujitsu Air Conditioner can occur for several reasons. When heating operation is started, fan speed is temporarily very low to allow internal parts to warm up. During heating, if the room temperature rises above the thermostat setting, the outdoor unit will stop, and the indoor unit will operate at a very low fan speed. The unit will temporarily stop operation (between 7 and 15 minutes) as the automatic defrosting mode operates. During dry operation, the fan may operate at very low speed when the unit is monitoring the room’s temperature. Also, the fan will operate at very low speed during SUPER QUIET operation or in monitor AUTO operation.
L
Lauren WalkerAug 7, 2025
What to do if my Fujitsu Air Conditioner doesn't operate at all?
- G
  garrettfrancesAug 7, 2025
  If your Fujitsu Air Conditioner isn't operating, start by checking if the power supply plug is disconnected from the outlet. Then, check for a power failure in your area. Inspect the fuse to see if it has blown out, or if a circuit breaker has been tripped. Also, verify that the main POWER switch is not set to the OFF position and that the timer is not operating.
J
joe15Aug 11, 2025
Why does my Fujitsu Air Conditioner smells?
- T
  Tiffany BellAug 11, 2025
  If your Fujitsu Air Conditioner emits a smell, it's likely that room odors (from furniture, tobacco, etc.) have been drawn into the unit. As a result, these smells may be emitted from the indoor unit.
J
josephguerreroAug 15, 2025
Why is my Fujitsu Air Conditioner not operating immediately?
- L
  leslie63Aug 15, 2025
  Your Fujitsu Air Conditioner might not operate immediately if the unit was recently stopped and then restarted. The compressor will not operate for about 3 minutes to prevent fuse blowouts. Also, if the power supply plug was recently disconnected and then reconnected, the protection circuit will operate for about 3 minutes, preventing operation during that period.

Fujitsu AST9RSHCW Specifications

General

Cooling Capacity	2.5 kW
Heating Capacity	3.2 kW
Coefficient of Performance (COP)	3.61
Power Supply	220-240V, 50Hz
Refrigerant	R32
Indoor Unit Weight	9.5 kg
Type	Split System

Summary

Safety Precautions

Preparation

Turn on the Power

Instructions for connecting the power supply plug and turning on the unit.

Set the Current Time

Procedure to set the current time on the remote control for accurate timer functions.

Operation

Select Mode Operation

How to choose the operating mode (AUTO, HEAT, COOL, DRY, FAN) using the MASTER CONTROL button.

Stop Operation

Procedure to stop the air conditioner operation using the START/STOP button.

Set the Thermostat

Instructions for adjusting the desired temperature using the SET TEMP. buttons.

Auto Changeover Operation

Explanation of automatic mode selection based on room temperature and thermostat settings.

Set the Fan Speed

Method for selecting the fan speed from AUTO, HIGH, MED, LOW, or QUIET.

Mode Operation Details

Details on the specific functions and behaviors of Heating, Cooling, Dry, and Fan modes.

Timer Operation

Use the ON Timer or OFF Timer

Steps for setting the timer to turn the air conditioner ON or OFF at a specific time.

Use the Program Timer

How to program a sequence of ON and OFF timer operations within a 24-hour period.

About the Program Timer

Description of the PROGRAM timer's capability to integrate OFF and ON timer operations.

Sleep Timer Operation

Use the Sleep Timer

How to activate and set the SLEEP timer to automatically adjust temperature and stop the unit.

Change the Timer Settings

About the Sleep Timer

Adjusting the Direction of Air Circulation

Vertical Air Direction Adjustment

Cleaning and Care

Cleaning the Intake Grille

Cleaning the Air Filter

Troubleshooting

Related product manuals

Fujitsu AST9RSG-W

Fujitsu AST9RSGCW

Fujitsu AST9UMBD

Preview: Fujitsu AST9UMAD

Fujitsu AST9UMAD

Preview: Fujitsu AST9LSACW

Fujitsu AST9LSACW

Fujitsu AST9LSBCW

Preview: Fujitsu AST9PSACW

Fujitsu AST9PSACW

Fujitsu AST9 SERIES

Fujitsu AST18AB

Preview: Fujitsu AST20AG

Fujitsu AST20AG

Preview: Fujitsu ASTA09LCC

Fujitsu ASTA09LCC

Fujitsu ASTA24LCC