EasyManuals Logo

Fujitsu ASTG18KMTC User Manual

Fujitsu ASTG18KMTC
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
En-9
10. CLEANING AND CARE
CAUTION
Before cleaning this product, be sure to turn it o󰀨 and
disconnect all the power supply.
Before starting operation, make sure that the intake
grille has been shut completely. Incomplete closing
of the intake grille might have an e󰀨ect on the proper
working or performance of the air conditioner.
If the lter cleaning involves high-place work, please
consult the authorized service
personnel.
Do not touch the aluminum ns of heat exchanger
built-in the indoor unit to avoid personal injury when
you maintain the unit.
Do not expose the indoor unit to liquid insecticides or
hair sprays.
Do not stand on slippery, uneven or unstable surfaces
when you maintain the unit.
The frequency of the cleaning is as shown in the following table.
What to do Frequency
Cleaning indoor unit body When you notice
Cleaning air lter Every 2 weeks
Cleaning Ion deodorization lter Every 3 months
Replacing Apple-catechin lter
(Model name: UTR-FA16)
Replacing Ion deodorization lter
(Model name: UTR-FA16-2)
Every 3 years
* The air cleaning lters are sold separately. When you replace them,
please contact the store of purchase.
Cleaning indoor unit body
NOTES:
Do not use water hotter than 40 °C.
Do not use scouring cleanser, volatile solvents such as benzene or
thinner.
1. Wipe the indoor unit body gently with a soft cloth moisten
with warm water.
2. Wipe the indoor unit body gently with a dry and soft cloth.
Cleaning air lter
1. Open the intake grille.
2. Remove the air lters.
Lift up the air lters' handle, disconnect the two lower tabs, and pull
out.
Air lter handle
Hooks (2 places)
3. Remove the dust in either of the following ways.
Cleaning with vacuum cleaner.
Washing with mild detergent and warm water. After washing, dry the
air lters thoroughly in shade.
4. Replace the air lters.
Align the sides of the air lter with the panel, and push in fully.
Make sure to the two lower tabs are returned to their holes in the
indoor unit properly.
5. Close the intake grille.
Press 4 places on the intake grille to close it completely.
NOTES: If dirt accumulates on the air lter, airow will be reduced,
operating e󰀩ciency will lower, and the noise will increase.
Cleaning Ion deodorization lter and
Replacing Apple-catechin lter
1. Remove the air lters. Refer to steps 1 ~ 2
of "Cleaning air
lter".
2. Remove the air cleaning lters from the air cleaning lter
holder.
Air cleaning lter
Air cleaning lter frame
3. Flush the Ion deodorization lter (light blue) with high-
pressure hot water until the surface of the lters are covered
with water.
4. Wash the Ion deodorization lter with diluent neutral
detergent.
Do not ream or rub, otherwise the deodorizing e󰀨ect may decrease.
5. Rinse the Ion deodorization lter with water ow.
6. Dry the Ion deodorization lter in shade.
7. Remove the Apple-catechin lter (light green) from the air
cleaning lter holder.
8. Set the new or washed air cleaning lters into the air
cleaning lter frames.
NOTES: Use the Apple-catechin lter as soon as possible after opening
the package. The air cleaning e󰀨ect decreases when the lters
are left in the opened package.
Air cleaning lters
(Apple catechin lter, Ion deodorization lter)
Intake grille
Air lters
Indoor unit body

Other manuals for Fujitsu ASTG18KMTC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ASTG18KMTC and is the answer not in the manual?

Fujitsu ASTG18KMTC Specifications

General IconGeneral
BrandFujitsu
ModelASTG18KMTC
CategoryAir Conditioner
LanguageEnglish

Related product manuals