Fujitsu ASTG22KMTC - Paring Method; Manual Mode

ChoosefromthefollowingmodestoconnectyourAirconditionertoyourWirelessLANrouter.
Note:

Beforestartingthissetting,waitfor60secondsormoreafterthepowersupplyisconnectedtotheairconditioner(viabreakerorplug).ConfirmthattheLED1isnotflashing.

CheckthatthesmartphoneortabletPCislinkedtothewirelessrouteryouareconnectingtheairconditioner.
Thesettingwillnotworkifitisnotconnectedtothesamewirelessrouter.

Thedisplaycontentsaresubjecttochangeasaresultofupdatesinthemobileapp,andmaynotmatchtheactualscreen.

Tocontrol2ormoreairconditionerswiththesamesmartphoneortabletPC,repeatthesetupofthechosenmode.
Air conditioner registration
Paring Method
02-45
■
Manual mode (For Android OS)
*Lightingpattern:



On

Blinking

Anystate
NOTES: Ifyoudonotpressanybuttonsoftheremotecontrollerfor60seconds,theremotecontrollerdisplaywill
returntotheoriginaldisplay.
1
Press on the remote controller until only the
clock is displayed on the remote controller display.
2
Launch the mobile app.
3
Sign in with your Email address and password fol-
lowing the screen on the mobile app.
(E mailAddress)
(Pass word)
SignIn
4
Press [+] to add a new air conditioner.
+
5
Press down on the remote controller for more
than 5 seconds.
will be displayed on the remote controller dis-
play.
(Remotecontroller
display)
6
Press .
7
Select using .
(Remotecontroller
display)
8
Press .
on the indoor unit will blink.
(Continued)