Fujitsu ASU9RLS2 - Indoor Unit Features

- (01 - 01) -
WALL MOUNTED TYPE ASU9-15RLS2 WALL MOUNTED TYPE ASU9-15RLS2
FEATURE1.
MODEL

ASU9RLS2 / AOU9RLS2
ASU12RLS2 / AOU12RLS2
ASU15RLS2 / AOU15RLS2
FEATURES

Energy Efciency
z
MODEL
ASU9RLS2 ASU12RLS2 ASU15RLS2
Seasonal Energy Efciency Ratio (SEER) 27. 2 25.0 21.5
Heating Seasonal Performance Factor (HSPF) 12.5 12.0 12.0
MEASUREMENT CONDITIONS
ANSI/ASHRAE STANDARD 37-1988
Thin & Slim design
z
Powerful heating
z
Heating capacity was improved at low outdoor temperature. Rated heating capacity is maintained
even at 19°F (-7°C) outdoor temperature. This new model can operate even at -5°F (-21°C) low
outdoor temperature.
Powerful operation
z
*Only available with Wireless RC.
20 minutes continuous operation by maximum airow and maximum compressor speed is
possible. Rapid cooling and heating makes the room comfortable quickly.
Powerful
Setting temp.
Normal mode
Time
Temperature
Large fan
Open
panel
Distributor
4-path
Refrigerant
Large intake
Big open panel and High density multi path heat
exchanger
Thin and slim design is realized by Ø5mm heat
exchanger and high efficiency wind blower.
H11-3/32 × W34-1/4 × D7-9/32 in.
(H282 × W870 × D185 mm)
7-9/32 in.
(185mm)
Ø3/16in.
(Ø5mm)
25/32 in.
(20mm)