Manual mode (For Android)
1. Launch the mobile app.
2. Sign in with your E-mail address and password following the screen on the mobile app.
john@fgl.co m
ÛÛ ÛÛÛ Û
Sign in
3. Press the + button to add a new air conditioner.
4. Select manual mode.
Bu tto n mo de
Ma nua l mo de
If both of the LED 1 and 2 are off, push the setting button once.
5. Select the SSID of the air conditioner to be connected.
AC-UTY-x xxx xxxxxx
Enter
password
ÛÛ ÛÛÛ Û
Connect device
Selected ro ute r
Input the PIN code written on the wireless LAN label.
6. Select the SSID of the wireless LAN router to be connected.
Home AP
Enter
password
Select the WLA N
Access Point
XYZ AP
ÛÛ ÛÛÛ Û
ABC123
Connect device
Selected ro ute r
Input the wireless LAN router (wireless LAN access point) password then press Connect device
button.
7. When setup is completed, both of the LED 1 and 2 flash 2 times, and a message appear.
Registration
Successful!
2 times
4-7. Mobile app setting method
- (03-62) - 4. Troubleshooting with error code (For wireless LAN adapter)
TROUBLESHOOTING
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
