REPLACEMENT PARTS
09-12
Model : AOYR24LCC
PROCESS
Wiring HEAT SINK SUB ASSY
REGULATIONS
Do the twist work with the following combination.
(Twist it 1 time is to twist 360 .)
red (W16)
black(W17) two times. (Width of twist.30~40mm)
Connect a wire (red) with terminal to +POLE of ACTPM
Connect a wire (black) with terminal to -POLE of ACTPM
+POLE
ACTPM
ACTPM
-POLE
ACTPM
IPM PWB
Pay attention the
Direction of installation
Width of twist 30~40mm
To Next Page
Loading...
