Fujitsu ASYG07KMCC User Manual

 SW6: Memory backup setting
Set to “ON” to use batteries for the memory backup.
When batteries are not used, all of settings stored in memory will be deleted if there is a power
failure.
SW6 Memory backup Factory setting
OFF Disable ♦
ON Enable
- 346 -
15-7. Wired remote controller (UTY-RNNYM)
15. Function settings
4-5 UNIT MULTI-SPLIT TYPE 4-5 UNIT MULTI-SPLIT TYPE

Fujitsu ASYG07KMCC Specifications

General

Cooling Capacity	2.0 kW
Heating Capacity	2.5 kW
Energy Efficiency Class (Cooling)	A+++
Energy Efficiency Class (Heating)	A++
Refrigerant	R32
Power Supply	220-240V, 50Hz
Type	Split System
Noise Level (Indoor Unit)	19 dB