6. SYSTEM DESIGN
5-3-3. AR-REB1E
SWITCHING SELECTION OF FUNCTION SETTING MODE
(2) Press and hold the "POWERFUL" and "TEMP.
"
buttons. While holding these 2 buttons,
press the "RESET" button.
CONFIRMATION OF CUSTOM CODE
(3) Press the “TEMP. ” or “TEMP. ”
buttons to select the custom code that
matches the setting with the indoor unit.
By selecting the appropriate custom code,
the communication between the indoor unit
and the wireless RC becomes possible.
The initial setting is " "
CUSTOM CODE
(
--
-
)
(4) Press the “MODE" button to send the code
to the indoor unit.
RESET
Function setting
To Next Page
Loading...
Need help?
General
