- (01 - 24) -
CASSETTE TYPE
AU
A45-54LC
CASSETTE TYPE
AU
A45-54LC
PRECAUTIONS WHILE CONNECTING AIR OUTLET DUCT
z
Connect the air outlet duct at up to two locations among the four duct
connection locations. (Do not connect ducts at three or more locations.)
z
Blow-off pattern when a branch duct is installed
Bi-directional branching, main unit bi-directional branching
z
Once the location where the duct is to be connected is decided,
always be sure to close the outlets in the same direction.
Close Close
Branch
Branch
Close
Close
Branch
Branch
DUCT (Locally procured parts)
Close the outlet here.
* Use only after closing the outlet of the cassette on the
side on which the duct is used, using the “Air outlet
shutter plate (UTR-YDZC)”.
To Next Page
Loading...
