Fujitsu AUXG07-22KVLA User Manual


Input signal type
External input and output PCB:
The input signal type can be selected.
Signal type (edge or pulse) can be switched by the DIP switch SW302 on the External input and out-
put PCB.
Pulse
The width of pulse must be
longer than 200 msec.
Edge
- 195 -
11-4. Wall mounted type (KGTE, KMTE, KMCE, KETE, and KETE-B) 11. External input and output
4-5 UNIT MULTI-SPLIT TYPE 4-5 UNIT
MULTI-SPLIT TYPE

Fujitsu AUXG07-22KVLA Specifications

General

Brand	Fujitsu
Model	AUXG07-22KVLA
Category	Air Conditioner
Language	English