Energy saving functions
Standby mode
StandbymodeON/OFF butto n
► Press the O N/O FF butto n to switch the Standby mode on and off.
Windows XP:
You can configure the ON/OFF button under Start –(Settings) - Control Panel -
Performance and Maintenance - Power Options - Advanced.
Windows Vista:
You c an configure the ON /OF F switch under Start symbol - (Settings) - Control
Panel - Mobile PC - Power Options - A dvanced.
In the Standby/Suspend-to-DRAM
mode the content of you r main memory is saved by continuing
to supply the main m emory with pow
er, while the processor, monitor, hard disk and other internal
components are switched off. Thi
s mode is activated whenever you press the ON/OFF butto n.
Saving is also triggered when yo
u d o not make an entry on your notebook for a certa in time. When
you resume work, your noteboo
k returns to the place at which you discontinued working.
Windows XP:
You can set the power-manageme
nt feat ures for your notebook under Start – (Settings)
- Control Panel - P erformance a
nd Maintenance - Powe r Options.
Windows Vista:
You can set the power-manage men
t features for your notebook under Start -
(Settings) - Control Panel - M
obile PC - Power O ptions.
If you are using an integrate
d LAN/Modem, a PC-LAN card or a PC
modem card , please be aware t
hat switching over to Standby mode can
lead to an interruption in t
he network connection .
Your notebook will switch of
f if you press the ON/OFF button for more than 4 seconds.
Additional information on this service programme is contained in
your operating system help files.
A26391-K200-Z226-1-7619 , edition 2 51
To Next Page
Loading...
