Fujitsu CELSIUS H920 - User Manual

Questions and Answers

P
Paul WaltersAug 20, 2025
Why won't my Fujitsu Laptop start?
- S
  Shelley WebbAug 20, 2025
  Your Fujitsu Laptop might not start because the battery isn't correctly installed. Ensure the battery is properly placed in its compartment and then try switching the notebook on. Alternatively, the battery might be dead. In this case, charge the battery, insert a charged battery, or connect the mains adapter to the notebook. Another possibility is that the power adapter isn't correctly connected. Verify that the mains adapter is properly connected to the notebook and then try switching it on.
K
kathrynjamesAug 22, 2025
Why does Fujitsu Laptop radio connection to a network not work?
- M
  megankimAug 22, 2025
  If the radio connection to a network is not working on your Fujitsu Laptop, the wireless component might be disabled. Switch the radio component on. If the wireless component is enabled but the connection still doesn't work, check whether the radio connection is switched on via the software. Further information on using the radio component can be found in the help files.
R
Robert CarsonAug 25, 2025
What to do if Fujitsu CELSIUS H920 Laptop keyboard controller has error?
- P
  phillipscolleenAug 25, 2025
  If your Fujitsu Laptop displays a keyboard controller error, switch the notebook off with the ON/OFF switch. Wait 3 - 5 seconds and switch on the notebook again.
A
Amanda SuttonAug 26, 2025
What to do if my Fujitsu Laptop stops working?
- J
  Justin ScottAug 26, 2025
  If your Fujitsu Laptop stops working, it could be due to several reasons. First, the notebook may be in energy-saving mode; try leaving energy-saving mode. Second, an application program might have caused the malfunction. Try closing the application or restarting the notebook by restarting the operating system or switching the device off and back on again. Third, the battery could be dead. Try charging the battery, inserting a charged battery, or connecting the mains adapter to the notebook.
H
hatfieldwendyAug 27, 2025
How to fix CMOS battery bad error on Fujitsu Laptop?
- W
  William KirkAug 28, 2025
  If you repeatedly receive the error message 'CMOS battery bad' on your Fujitsu Laptop, it indicates that the buffer battery in the notebook is flat. Contact your sales outlet or our customer service center.
T
Tammy DeleonAug 29, 2025
What to do if Fujitsu Laptop printer does not print?
- C
  Catherine PalmerAug 29, 2025
  If your Fujitsu Laptop's printer isn't printing, first ensure the printer is switched on and ready for operation. Refer to the printer's documentation for guidance. Next, check that the data cable connecting the notebook to the printer is properly connected. Finally, verify that the correct printer driver is loaded; refer to the printer documentation for assistance.
K
Kevin HunterAug 31, 2025
How to resolve System CMOS checksum bad error on Fujitsu CELSIUS H920 Laptop?
- K
  Karen WagnerAug 31, 2025
  To resolve the 'System CMOS checksum bad' error on your Fujitsu Laptop, switch the notebook off, then switch it back on. Press the F2 function key to access the BIOS Setup. In the BIOS Setup, select the Exit menu, then select the entry 'Load Setup Defaults'. Select OK and press the Enter key.
M
Michelle CaldwellSep 2, 2025
How to fix Extended memory failed error on Fujitsu CELSIUS H920?
- J
  Jeremy BrewerSep 2, 2025
  If you encounter an 'Extended memory failed' error on your Fujitsu Laptop, check whether the additional memory module has been inserted correctly.
S
Sara FergusonSep 4, 2025
How to fix Failure Fixed Disk error on Fujitsu Laptop?
- S
  Sean HuntSep 4, 2025
  If you encounter a 'Failure Fixed Disk n' error on your Fujitsu Laptop, start the BIOS Setup (Primary Master submenu) and select the correct settings.
K
Kurt LongSep 6, 2025
What to do if Fujitsu CELSIUS H920 says operating system not found?
- C
  Curtis HernandezSep 6, 2025
  If your Fujitsu Laptop displays 'Operating system not found', check in the BIOS Setup whether your hard disk has been set correctly. Also, make sure that the operating system is installed on the corresponding drive.