Removing and installing components
during servicing
Removing a cover
1
2
► Remove the screw (1).
Keep the screws in a safe place. If you are removing more than one component at
the same time, store the screws for the individual components sepa rate from each
other. If you install the w rong screws, components may be damaged.
► Lift the cover off the notebook (2).
Removing memory modules
3
2
1
1
► Carefully push th e two mounting
clips o utwards (1).
MemoryexpansionMemorymodule
The memory module snaps upwa rds (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
66 Fujitsu Tech nology Solutions
To Next Page
Loading...
