Importan t notes
Important notes
ImportantnotesNotes
This chapter contains essential sa fety information which must be followed
when working with you r notebook. Other note s also provide useful information
which will help you with your notebook.
Safety notes
SafetynotesNotes
Please follow the safety notes provided in the "Safety/Regulations" manual
as w ell as the safety notes given below.
Please pay special attention to the sections in the manual m arked
with the symbo l on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
Read the information o n the ambient conditions in the "
Technical data ",
Pag e 83 and "First-time setup of your device", Page 15 before preparing your
notebook for use and s witching it on for the first time.
When cleaning the device, please ob serve the relevant note s in th e
section "
Cleaning the notebook " , Page 14.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/R egulations" manual.
Please refer to the notes in the chapter "
Removing and installing
comp onents during servicing", Page 64.
This notebo ok
complies with the relevant safety regulations for data processing
equipment. I
f y ou have questions abo ut using your noteb ook in a particular area,
please conta
ct your sales outlet or our Hotline/Service D esk.
Additional safety notes for devices with
radio components
Radiocom pon ent:WirelessLAN:Bluetooth,safetynotes
If a radio component (W ireless LAN, Bluetoot h, UMTS) is integrated in your no tebook, you
must be sure to observe the following safety notes w hen using your notebook:
• Switch off the radio components when you are in an aircraft or driving in a car.
• Switch off the ra dio components whe n you are in a ho spital, an operating room or near a medical
electronics system. The transmitted radio waves can impair the operation of medical devices.
• Switch off the radio components when you let th e de vice get near flammable
gases or into hazardous environments (e.g. p e trol station, paintshops), as the
transmitted rad io waves can cause an explosion or a fire.
For information on how to switch radio compo nents on and off, see chapter
"
Switch ing the wireless components on and off", Page 43.
12 Fujitsu Tech nology Solutions
To Next Page
Loading...
